Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

How to take out WCCP completely..?

Hi All,

We have WAEs between 2 sites and would like to take out all the commands and the equipmwent from network. Commands added on both end routers (RTRA & RTRB:

Global config mode:

ip wccp version 2

ip wccp 61

ip wccp 62

Interface mode:

ip wccp 61 redirect in

ip wccp 62 redirect out

RTRA is Hub router connects to several satellite offices and WCCP enabled for only one Satellite office (where RTRB existing).

I started tyo takeout WCCP with interface commands like:

no ip wccp 61 redirect in

no ip wccp 62 redirect out

But no such commands exists.

So, please advise on sequence and proper commnads to tak eout WCCP services from routers.

Thank you in advace

MS

1 REPLY
Silver

Re: How to take out WCCP completely..?

To remove Web Cache Communication Protocol (WCCP) statistics (counts) maintained on the router for a particular service, use the clear ip wccp command in EXEC mode.

clear ip wccp {web-cache | service-number}

117
Views
0
Helpful
1
Replies
CreatePlease to create content