Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to transfer image from one AP to another AP (Cisco Aironet AP 1300)

Hi All,

I need a favour, can someone  tell me how i can transfer an image from one AP to another AP. I know  you have to make one of them as a tftp-server, but it will be helpful if  someone can just specify the cli here. I've also tired archive  download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name,  but it did not work.

Thanks, and your help is much appreciated.

Regards,

Nav

2 REPLIES
Cisco Employee

Re: How to transfer image from one AP to another AP (Cisco Airon

I think you are looking for the tftp-server command which is documented here:

http://tools.cisco.com/squish/D5D60

New Member

Re: How to transfer image from one AP to another AP (Cisco Airon

yes, thanks for the reply, i tried that and i still received an error on the ap that i'm trying to download the file from.

first i've set AP (A) as the tftp-server.

config t

tftp-server flash:/c1310-k9w7-mx.v122_13_ja.20031010/c1310-k9w7-mx.v122_13_ja.20031010

end

wr mem

But on AP (B) - what is the syntax or the cli that we use to download ?

copy tftp flash can't be used for ap.

162
Views
0
Helpful
2
Replies