11-26-2008 07:24 AM - edited 03-06-2019 02:41 AM
Dear All,
I need to know how to upgrade the system bootstrap image on 6506-E with two rendundant sup32-ge-3b?
Thanks & Regards,
Igor.
Solved! Go to Solution.
12-02-2008 11:41 AM
Before upgrading Verify the minimum amount of DRAM, flash memory and Boot ROM version necessary for the new software release. Check whether your switch supports the requirements. Refer to Release Notes for Catalyst 6000/6500 Series Switches in order to verify the requirements for the new software image.
Here is the link for Upgrade bootstrap image on 6500 series.
12-02-2008 11:41 AM
Before upgrading Verify the minimum amount of DRAM, flash memory and Boot ROM version necessary for the new software release. Check whether your switch supports the requirements. Refer to Release Notes for Catalyst 6000/6500 Series Switches in order to verify the requirements for the new software image.
Here is the link for Upgrade bootstrap image on 6500 series.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: