Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

How to view the stack backplane utilization on C3750 switches ?

We have a stack of 4x C3750G-48TS-S switches. Stackwise on these switches have a capacity of 32Gbps. Users are complaining of "slow" speed, copying files from server ports to server ports on the same stack. How can i view the stack backplane utilization and verify if there are any dropped frames/congestion problems here ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: How to view the stack backplane utilization on C3750 switche

Geert

I think this should give you an idea of what is happening in terms of bandwidth utilisation on the switch -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_40_se/command/reference/cli2.html#wp3573524

Jon

2 REPLIES
Hall of Fame Super Blue

Re: How to view the stack backplane utilization on C3750 switche

Geert

I think this should give you an idea of what is happening in terms of bandwidth utilisation on the switch -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_40_se/command/reference/cli2.html#wp3573524

Jon

Bronze

Re: How to view the stack backplane utilization on C3750 switche

sh controllers utilization

gives me some indication.

tkx,

444
Views
0
Helpful
2
Replies
CreatePlease login to create content