How to view Traffic/Queues after QoS Implementation
I have implemented QoS (I wanted to give higher Priority to TCP based data/packets than UDP based data/packets on my four 2955 switches making Mesh topology and running RSTP Protocol)by using following commands successfully:
priority-list 1 protocol ip high tcp xx
priority-list1 protocol ip medium udp xx
int vlan 1
Now after implementing these above commands I want to see/monitor that does these above commands working fine or not?? and how they Prioritizing TCP and UDP traffic?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.