Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

HP Virtual Connect and Cisco 3560G

Dear Netpro community,

I am facing a situation. My system team has recently bought a c7000 HP blade enclosure with a Virtual connect module.

The ports have been configured to 1 blade to 1 vc port and to 1 cisco switchport. When we hook up the systems, we saw the following messages:

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/18 and port Gi0/16

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/16 and port Gi0/17

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/18 and port Gi0/16

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/16 and port Gi0/17

1d02h: %SW_MATM-4-MACFLAP_NOTIF: Host 001f.29d0.af4b in vlan 9 is flapping betwe en port Gi0/18 and port Gi0/16

The mac 001f.29d0.af4b is an internal stacking address between Virtual connect bay 1 and bay2.

The switchports has been configured in access mode and same vlan.

Pse advise.

301
Views
0
Helpful
0
Replies
CreatePlease to create content