I just moved my config from a 5505 to a 6509 (IOS) and my HSRP is not working. One of the 6509 is suppose to be the active for group 1, and standby for group2. Now all active are on 1 6509 and all standby are on the other.
Attached is the output of show standby.
I have a fibre link between both 6509 switches with vlan all set on it to see if it would fix it. So far no luck.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...