Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

HSRP and MLPPP

How HSRP will work with the MULTILINK PPP???

in terms of the Interface tracking option...

which interface HSRP track if i will have the multiple serial interface belong to the single MULITLINK PPP?

Please reply me if possible as this ASK EXPERT event is for the Catalyst swtiches

3 REPLIES
Cisco Employee

Re: HSRP and MLPPP

Devang,

You can track any serial interface with in the multilink bundle ?

What is your exact requiremnt. Do you want your standby router to become active even when one of the interface goes down? You want your standby router to become active when the entire multilink bundle goes down ?

Please explain the requirement.

-amit singh

Re: HSRP and MLPPP

My scenario is...

i have 4 serial link... which are terminated to two different router... 2 serial link on router A and 2 serial link on router B...and i have configured the MLPPP on both the router to bundle the two serial link logically....

now i want to configure the HSRP for redundancy... so let assume my router A is active router and router B is standby router... now i enable the tracking on both the router for the Multilink PPP... now how tracking of serial interface will work over here...???

regards

Devang

New Member

Re: HSRP and MLPPP

hi,

u can configure ip sla to monitor the other end of the MLPP by pinging the ip of the other end. and track the rtr.

hope this helps.

amit

259
Views
0
Helpful
3
Replies
CreatePlease to create content