Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

HSRP and multiple Subnets in VLAN

I have several interface VLANs. I use HSRP to create redundancy. Most vlans have one class C subnet specified. I would like to add a secondary subnet to a vlan and want that to be HSRP as well.

Can someone send me a link or show me a sample config of how to set up 2 subnets in HSRP configuration on a interface single vlan? I'm using IOS on SUP 720's.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: HSRP and multiple Subnets in VLAN

hi,

this linke might be help you:

http://www.cisco.com/en/US/products/ps6600/prod_bulletin09186a00800a3d9e.html

as here router is configured with muliple ip address as it have multiple subnets in the LAN so you can create the multiple hsrp group and can get your work done... bur just checke that are you able to assign the secondary IP address to your VLAN interface or not if yes then your work is done...

just let me know about the same

rate this post if it helps

regards

Devang

1 REPLY

Re: HSRP and multiple Subnets in VLAN

hi,

this linke might be help you:

http://www.cisco.com/en/US/products/ps6600/prod_bulletin09186a00800a3d9e.html

as here router is configured with muliple ip address as it have multiple subnets in the LAN so you can create the multiple hsrp group and can get your work done... bur just checke that are you able to assign the secondary IP address to your VLAN interface or not if yes then your work is done...

just let me know about the same

rate this post if it helps

regards

Devang

417
Views
0
Helpful
1
Replies
CreatePlease to create content