Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HSRP cat3750 facing HSRP nexus

 

I have two cat3750 switch and it facing two nexus router.

My goal is to configure HSRP on routed ports of the switch going to nexus router ( which also has HSRP) so logically it will have cat3750 <-----> Nexus connection.

I already configure the HSRP on the routed port of the switch. But it seems like shen i use "sh standby" or "sh standby brief" both of them are in active state. What connection do should I have between two switches to have HSRP work fine?

FYI behind the cat3750 are hosts with intervilan connection.. uplink going out of switch to nexus.


Thank you,

Josh

Everyone's tags (1)
1 REPLY
VIP Super Bronze

You can use the Nexus to

You can use the Nexus to connect the 3750s together. Put the ports that connect to Nexus in a layer-2 vlan. This way, the 2 3750s can see each other and you should be able to ping both 3750s and the vip address.  Use a higher priority on the router you want to be the master.

HTH 

40
Views
0
Helpful
1
Replies