Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

HSRP catalyst 4506

Hi I have two catalyst sw 4506 and I have set them in so redundate a sw I have already configured with vlans, and routes within my LAN, and that gives me an environment HSRP active - passive.

.

My 4506  has a 12-port Fo module and  management module is enough with these modules or need any more?

I have to delete the configuration I have in production to implement HSRP.

How should this implementation of HSRP.

Thanks for your help

3 REPLIES

HSRP catalyst 4506

The number of modules needed depends on how many ports you need. Why do you need to delete configuration to implement HSRP? Not sure I understand you.

Daniel Dib
CCIE #37149

Daniel Dib CCIE #37149 Please rate helpful posts.

HSRP catalyst 4506

I 4506 1 has a configuration and production my 4506 2 has a copy of that configuration.

when you deploy that configuration running HSRP in 4506 1 is not lost?

I have 12 ports to connect to 12 edge sw 2600

HSRP catalyst 4506

Do you mean that they have identical configurations? The IP addresses must be unique at least. HSRP config can be the same but you need to set the priority to make the correct switch active.

Daniel Dib
CCIE #37149

Daniel Dib CCIE #37149 Please rate helpful posts.
157
Views
0
Helpful
3
Replies
CreatePlease to create content