Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

HSRP Filling up Logs

It looks like both my HSRP Interfaces (VLAN 600 & 700) cycle through standby --> active ---> speak continuously on one of the two switches.  What can be causing this?

*May  4 06:41:24.883: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Speak -> Standby

*May  4 06:41:33.671: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Standby -> Active

*May  4 06:41:33.671: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Active -> Speak

*May  4 06:41:34.251: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Speak -> Standby

*May  4 06:41:47.691: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Standby -> Active

*May  4 06:41:47.703: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Active -> Speak

Everyone's tags (1)
1 REPLY

HSRP Filling up Logs

Are you tracking interfaces? If not, you are losing hello packets somehow. I noticed that you have the configuration on group 0 which usually means that a group wasn't specified. Do you have another group on 0 as well? Can you post your HSRP config?

HTH,

John

HTH, John *** Please rate all useful posts ***
311
Views
0
Helpful
1
Replies
CreatePlease to create content