Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.


HSRP issue on 7206vxr router.

Hi Experts ,

I have the following config on 7206vxr for hsrp , which is active router.

interface FastEthernet2/0

description connected to ixia

no ip address

ip access-group 110 in

duplex full


interface FastEthernet2/0.244

encapsulation dot1Q 244

ip vrf forwarding fastfail-vpn

ip address

standby ip

standby preempt delay minimum 150

standby authentication btmpls

standby track POS3/0.101

I've done couple of tests by applying sh /no shut on f2/0 and f2/0.244 to see whether hsrp interface ie. f2/0.244 is taking 150 secons to become avtive from standby.

Following are my observations.

When there is a sh/no sh on f2/0 , then f2/0.144 is taking 18 secons to become atcive.

when there is a sh/no sh on f2/0.144 , it is taking 150 secons to become active from standby.

But in the case of 7304 , in the above two cases hsrp interface is taking 150 secons to become active.

I would like to know why hsrp interface on 7206 router is not taking 150 secons to become active after sh /no sh on the main interface.i.e f2/0.

Thanks in advance.

CreatePlease login to create content