Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

HSRP on a 6513

My question is:

How do you setup HSRP on 2 6513's without using an external Router? Is this at all possible?

12.2(18)SXF8 with SUP720 MSFC3

Thanks

3 REPLIES
Community Member

Re: HSRP on a 6513

ya , its possible.Just configure secondary address and define priorty greater than defualt 1.e 110..because 100 is default.

12.2(18)SXF8 with SUP720 MSFC3 supprots HSRP..

Re: HSRP on a 6513

Here's an example

Switch 1

interface vlan 22

ip address 1.1.1.2 255.255.255.0

standby 22 ip 1.1.1.1

standby 22 priority 105

standby 22 preempt

Switch 2

interface vlan 22

ip address 1.1.1.3 255.255.255.0

standby 22 ip 1.1.1.1

standby 22 preempt

HTH, rate if it does

Narayan

Community Member

Re: HSRP on a 6513

I would consider GLBP not HSRP, GLBP allows all the hosts to be configured with the same IP address as the default gateway and still achieve redundancy and load balancin, and you won't have to add arp timeouts like I needed to do for an issue I ran into...

Consider GLBP as the next Gen of HSRP...

121
Views
4
Helpful
3
Replies
CreatePlease to create content