Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HSRP on Layer 3 switch (cisco 3560)

Hi,

To implement the HSRP on 2 different networks and connect them to each others (for example network A and network B) with cisco switch 3560, how many switches are required?

Network A = 2 switches

Network B = 2 switches

or

Network A = 1 switch

Network B = 1 switch

Your help is much appreciated. Thanks.

  • LAN Switching and Routing
2 REPLIES
Hall of Fame Super Blue

Re: HSRP on Layer 3 switch (cisco 3560)

ssweehinlew wrote:

Hi,

To implement the HSRP on 2 different networks and connect them to each others (for example network A and network B) with cisco switch 3560, how many switches are required?

Network A = 2 switches

Network B = 2 switches

or

Network A = 1 switch

Network B = 1 switch

Your help is much appreciated. Thanks.

To implement HSRP you would need at least 2 switches per subnet for it to make any sense. But you could use the same 2 switches for both network A and network B.

Jon

Re: HSRP on Layer 3 switch (cisco 3560)

Hi,

To implement the HSRP on 2 different networks and connect them to each others (for example network A and network B) with cisco switch 3560, how many switches are required?

Network A = 2 switches

Network B = 2 switches

or

Network A = 1 switch

Network B = 1 switch

Your help is much appreciated. Thanks.

Hi,

To implement HSRP you will need at least two switches and for running HSRP in two different subnet you can also achive with the same two switches by creating vlans and apply HSRP to those vlans.

Hope to help

If helpful do rate the post

Ganesh.H

1415
Views
0
Helpful
2
Replies
This widget could not be displayed.