I have two routers (RTA & RTB) with HSRP configured. Both routers has a serial connection to the ISP network. Preempt and tracking are enabled on both routers.
RTA has a priority of 115
RTB has a priority of 100
Default decrement value of 10
If serial connection of RTA goes down, because of serial tracking, RTA's priority will be 105.
RTA will still be the active router because of the higher priority (RTB=100).
My question is, will RTA perform another decrement to make its priority 95? Or will it remain its active status due to the higher priority, thus stopping the forwarding of traffic due to the down serial connection?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...