12-15-2006 09:18 AM - edited 03-05-2019 01:21 PM
Hi,
If active router fails, what is the time taken by standby router to come up (assuming default timers)?
Regards
SKRAO
12-15-2006 09:24 AM
Hi Siva,
It should be arund 10 seconds. HSRP default hello time 3 sec and hold time is 10 seconds. Once it misses 3 hellos i.e 9 seconds and hold-dwon timeer elapses it changes the other router as active.So after 10 seconds the other router will transtion itself to active state.
HTH,
-amit singh
12-15-2006 09:32 AM
The interval in seconds between hello messages (called the hello time) is 3 secs by default.
The duration in seconds that a router waits before it declares the active router to be down (called the hold time) is 10 secs by default.
So, standby router will become active router once hold down timer expire i.e after 10 secs after which network will re-converge.
hoep to help ... rate if it does ....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: