Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

HSRP with Secondary IP

Hi,

we are using the two 7206 VXR NPEG2 router as our backbone router and we planned to confiure the HSRP between the router

BGP PRI:

interface GigabitEthernet0/3

description BGP-PRI

ip address 2XX.XX.XX.252 255.255.255.0 secondary

ip address 2X.20.XX.17 255.255.255.0 -- ISP Link A

duplex auto

speed auto

media-type rj45

no negotiation auto

Standby 30 IP 2XX.XX.XX.254 secondary

Standby 30 priority 110

BGP -SEC

interface GigabitEthernet0/3

description BGP-SEC

ip address 2XX.XX.XX.253 255.255.255.0 secondary

ip address 2X.34.XX.44 255.255.255.0 -- ISP link B

duplex auto

speed auto

media-type rj45

no negotiation auto

Standby 30 IP 2XX.XX.XX.254 secondary

BOth routers are using the IOS version

BOOTLDR: Cisco IOS Software, 7200 Software (C7200P-K91P-M), Version 12.2(31)SB10, RELEASE SOFTWARE (fc2)

now our issue is when i configure the Standby 30 IP 2XX.XX.XX.254 secondary the router througing a error message that

% address cannot equal interface IP address

same if i configure on the BGP Sec its accespting

kindly let me know what might be the root cause

5 REPLIES

Re: HSRP with Secondary IP

try removing the "Secondary" key word from the standby 30 group config.

HTH>

Community Member

Re: HSRP with Secondary IP

Hi,

Thanks for your input

If i remove the secondary keyword how the HSRP will chose the redunacy

could u pls explain the things since i havent tried before

since we have primary ip for the interface how i can run HSRP for secondary IP alone

Re: HSRP with Secondary IP

Vinoth,

please read the below HSRP Guide/Case Study:-

http://www.cisco.com/en/US/docs/internetworking/case/studies/cs009.html

HTH>

Community Member

Re: HSRP with Secondary IP

interface GigabitEthernet0/3

description Telicity-PRI

ip address 2XX.20.XX.17 255.255.255.0

ip address XX.58.14.252 255.255.255.0 secondary

duplex auto

speed auto

media-type rj45

no negotiation auto

standby 30 ip 2xx.58.14.254 secondary ----- when we enter the command it shows below error and not accepting the command

% address cannot equal interface IP address

Can i know why the errors are highlight

Community Member

Re: HSRP with Secondary IP

Hi,

Try to make the addresses XX.58.14.25x the primary addresses and the recreate the hsrp without the 'secondary' keyword.

Paulo Roque

466
Views
0
Helpful
5
Replies
CreatePlease to create content