Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HSRP

Hi all, im im implementing hsrp and I have 2 subnets that need to use it am I best using 2 groups here and have both routers active, 1 in 1 group the other in group 2 ? and do I have to use multiple groups for that ?

4 REPLIES
Cisco Employee

Re: HSRP

Yes, Carl you have to use MHSRP. Using multiple groups you will be able to configure one group subnet active on one router and the other as standby and the same vice versa.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00805a64d8.html

HTH,Please rate if it does.

-amit singh

New Member

Re: HSRP

Hi, can we not do this using a single group ?

New Member

Re: HSRP

Hi ,

you can do it with single group and make router A active for one subnetA and router B standby for the same sbnet.

Similarly for subnet B you can make router B active and router A standby by using priority statment.

HTH.

rgds,

Rajesh

New Member

Re: HSRP

so what benifit would using 2 groups be here ?

108
Views
0
Helpful
4
Replies