Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Http ACCESS CATALYST 4006

Anyone know how to setup a catalyst switch for http access? I have neabled http and truned on authentication local fot http created use admin with pasword but I get a default screen one I attemp to login pointing me to support..

9 REPLIES
Purple

Re: Http ACCESS CATALYST 4006

You have to have the correct code to use http . The code name will have "cv" somewhere in the image name otherwise you have to download new code.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094156.shtml

New Member

Re: Http ACCESS CATALYST 4006

Cool thank you I have looked for this file and I can;t find it anywhere not even on CISCO site for downloads..

PLEASE LOOK:

http://tools.cisco.com/support/downloads/go/InterfaceModules.x?mdfid=268438086&mdfLevel=Model&treeName=Switches&modelName=Cisco%20Catalyst%204006%20Switch&treeMdfId=268438038

NO cv file

Purple

Re: Http ACCESS CATALYST 4006

what supervisor model do you have , when you said 4006 i made the assumption it was a Sup II .

New Member

Re: Http ACCESS CATALYST 4006

YES I have VER II

Purple

Re: Http ACCESS CATALYST 4006

If you have a Sup II it would look like this

cat4000-cv.8-4-1-GLX.bin .

New Member

Re: Http ACCESS CATALYST 4006

DO you know where I can find it.. I have had no luck..

Gold

Re: Http ACCESS CATALYST 4006

http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&filename=cat4000-cv.8-4-1-GLX.bin&advUrl=null&defInd=N&mdfid=273556251&sftType=CatOS%20Software&optPlat=&relVer=8.4(1)GLX&md5=1f4150a6a4a2708ee028ce66faccf15e&modifmdfid=273556251&imname=null&imst=N&hybrid=Y&modelName=Cisco%20Catalyst%204000%20Supervisor%20Engine%20I&treeMdfId=268437717&treeName=Cisco%20Interfaces%20and%20Modules&edesignator=&fsd=&hasfsd=N&nodecount=0

You need a valid service contract.

New Member

Re: Http ACCESS CATALYST 4006

THANK YOU

Purple

Re: Http ACCESS CATALYST 4006

You need a CCO account to download . If you can get to the catos download area it looks like version 8.4.1 was the last one they made the "CV" image for . Its under the 8.X releases .

306
Views
0
Helpful
9
Replies
CreatePlease to create content