I'm uploading a new image to a 3650 switch from c3560-ipbase-mz.122-25.SEB4 to c3560-ipbasek9-mz.122-25.EB4.bin image and now I can't brouse the switch but before the uplad I could...any sugestions?
I found the k9 image adds some different defaults to a few things, ip http server/secure-server to name a few.
Take a look at the running-config and look for a line spelling out http authentication, set it to what you want, confirm ACLs not killing you, or local auth when none is configured, and of course the IP general set up.
It's right out of the box..No ACL etc, See file.
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no aaa new-model
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip address 18.104.22.168 255.255.255.0
ip http server
ip http secure-server
line con 0
line vty 0 4
line vty 5 15
will look like something like this c3560-ipservices-tar.122-25.SEB4.tar .You then hav to use the archive command I believe , not real familiar with this as we never use the HTML web based mgt. feature , CLI only.
Yes, I agree on the CLI however, Some of the team member perfer not to ust the Cash Line Interface.. I found the image file and noted once I get it c3560-advipservicesk9-mz.122-25.SEB4? It converts the tar file.. Is that where you mentioned "Archeive command" comes in?
The archive command can extract an image directory tree and files from a .tar compressed image file and it can create a .tar compressed image file from a -drwx- image directory tree and files.