Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Hub connected ports in 6500 Switch

Hi,

We have lot of 6500 switches in our office, and also n number of hubs in each floors and each department, now we are in the plan of replacing of all the hubs to switch, how can we find it switch through command line other than physically identifying.

1 REPLY
New Member

Re: Hub connected ports in 6500 Switch

Hi~

Which do you use any OS, CatOS or IOS?

If you use CatOS,

"C6509(enable) sh cam dynamic ".

If you use IOS,

" C6509#sh mac-address-table dynamic interface fastEtherne"

If the MAC address be showed up More than 1 address on the port, it is cleary HUB.

EX)

C6509#sh mac-address-table dy int fa 6/24

Unicast Entries

vlan mac address type protocols port

-------+---------------+--------+---------------------+--------------------

160 0000.f09b.068d dynamic ip FastEthernet6/24

160 0000.f09b.6749 dynamic ip FastEthernet6/24

160 0004.9aaa.c500 dynamic ip FastEthernet6/24

160 000d.9dfe.ce2c dynamic ip FastEthernet6/24

160 0012.3f7d.fc2d dynamic ip FastEthernet6/24

160 0013.7710.877f dynamic ip FastEthernet6/24

160 0013.771b.6369 dynamic ip FastEthernet6/24

160 0013.778b.9579 dynamic ip FastEthernet6/24

160 0013.77c6.d3be dynamic ip FastEthernet6/24

160 0015.9923.8ab5 dynamic ip,ipx FastEthernet6/24

160 0030.6eea.13a8 dynamic ip FastEthernet6/24

C6509#

In case of this will spend many time.

118
Views
0
Helpful
1
Replies
CreatePlease login to create content