Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Hybrid to native help

Guys can someone please help me out as i am getting frustrated ....we have 6500 series with sub2 with MSFC2 card....we have to change it to native mode currently it has catos and i have read the cisco doco which is pretty clear y one thing i cant get my head around is upgardation of hardware

guys please help me out

current MSFC is running ios and it has 32MB of bootflash (is it called bootflash or something else?? as i dont understand that) the sup has 32 MB and 64Mb of the IOS which we have choose requirment is 256/64 now we haqve to buy 64MB of pcmcia card for sub to store that file now reagrding dram do we have to upgradr on sub 2 or MSFC as i cant get my head around that.....i am not getting this point....secondly on cisco doco it says that enter dir bootflash on sub and it will show you the file name and stuff but when i do that there is nothing in there but when i do show mudule it shows me the version there is no PCMCIA card so where the catos is???? i am totally confused....last one is that once we do it to native mode do we have to delete the IOS in mSFC?? or not guys...on cisco doco it says that we might need to upgarde the bootrom now do we have to do it physically??? is there any requirment?? plz help me out as i am getting nuts....thanks in advance


Re: Hybrid to native help