I have a trouble with configuration of Cisco Catalyst 3850 (WS-C3850-24T-E). Hyper-V server (2012R2) is connected to it. My issue is to separate the virtual machines on the Layer 2 Level. The virtual machines located in the same subnet. I chose to use a private VLAN feature in a Hyper-V. I set PrimaryVlanId 100 -SecondaryVlanId 1-10 on the virtual machine network adapters. I have configured an access port with VLAN ID 100 on Cisco. But the virtual machines don’t work with private VLAN. Which configuration should I set on the Cisco side in order to get it works with the private VLAN VMs?
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...