Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

I have a dead 2621xm router in my schools simulated LAN

Our 2621xm router is dead in our simulated LAN in the lab at my college. We have tried reloading the IOS several times and it is still dead. there is not prompt or anything it doesn't even try to boot from what I can tell. Any help you could give me would be greatly appreciated.

8 REPLIES

Re: I have a dead 2621xm router in my schools simulated LAN

Do your LED lights light up?

Can you console in and boot and see what the output is?

New Member

Re: I have a dead 2621xm router in my schools simulated LAN

Yeah the LED's do light up. I am consoled in and when I press enter to enter into command line it does nothing it doesn't even try to boot.

Re: I have a dead 2621xm router in my schools simulated LAN

If you stay consoled in and power cycle the router to you get any output?

New Member

Re: I have a dead 2621xm router in my schools simulated LAN

No there is still no output

Cisco Employee

Re: I have a dead 2621xm router in my schools simulated LAN

Hi Daniel

Are you sure if the console cable that you have is good? Also, what baud rate are you connecting at? Try 115200, 9600 and all other lower speeds and see if it helps.

~Vaibhav

New Member

Re: I have a dead 2621xm router in my schools simulated LAN

yeah the console cable is good. I am connecting at 9600 and have tried other speeds and it doesn't make a difference either way

Cisco Employee

Re: I have a dead 2621xm router in my schools simulated LAN

Daniel,

If the cable is good and you have tried all buad rates from the lowest to 115200, the router needs to be replaced.

~Vaibhav

Re: I have a dead 2621xm router in my schools simulated LAN

Agree, sounds like it's completely dead.

116
Views
0
Helpful
8
Replies
CreatePlease login to create content