Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

I want to add WS-C3750G-24TS-S in my existing stack.

I have WS-C3750G-12S-E and WS-C3750G-24TS-E in an existing stack.It's Ios version is 12.1 (19)EA1c. I want to add an new

WS-C3750G-24TS-S in existing stack. It's ios version is 12.2(25)SEE2.

2 REPLIES
Cisco Employee

Re: I want to add WS-C3750G-24TS-S in my existing stack.

Hi Upendra,

I will always recommed you to upgrade your current stack first to the one you have on your new switch and then insert your new switch into the existing stack.

Have a look at this link which will guide you how to upgrade switches which are stack.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml

HTH

Ankur

*Pls rate all helpfull post

Community Member

Re: I want to add WS-C3750G-24TS-S in my existing stack.

Hii

In the same manner i posted my problem tooo regardign stacking ,request u to pls go through that and revert me back

thanx

682
Views
0
Helpful
2
Replies
CreatePlease to create content