Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ICMP Port Unreachable from gateway 10.40.25.154 for udp from testserver (10.40.25.175) to 10.20.250.3 port 33440

Sir,

i got this output in Sun Solaris 9server while trying to ping 10.20.250.3 following error message is coming

ICMP Port Unreachable from gateway 10.40.25.154 for udp from testserver (10.40.25.175) to 10.20.250.3 port 33440 what may be the reason.Whether it is server problem or switch Problem.I have attached connectivity diagram.Kindly do the needful at the earliest.

10.20.250.3 is in vlan 1

10.40.25.154 is vlan 2

testserver # ping -s 10.20.250.16

PING 10.20.250.16: 56 data bytes

64 bytes from 10.20.250.16: icmp_seq=0. time=1. ms

64 bytes from 10.20.250.16: icmp_seq=1. time=40152. ms

64 bytes from 10.20.250.16: icmp_seq=2. time=39152. ms

64 bytes from 10.20.250.16: icmp_seq=3. time=38154. ms

64 bytes from 10.20.250.16: icmp_seq=4. time=37155. ms

64 bytes from 10.20.250.16: icmp_seq=5. time=36156. ms

64 bytes from 10.20.250.16: icmp_seq=6. time=35157. ms

64 bytes from 10.20.250.16: icmp_seq=7. time=34158. ms

ICMP Time exceeded in transit from 10.40.20.122

for udp from thirup5med (10.42.20.13) to 10.20.250.16 port 33437

ICMP Time exceeded in transit from 10.40.20.122

for udp from thirup5med (10.42.20.13) to 10.20.250.16 port 33438

ICMP Time exceeded in transit from 10.42.20.122

for udp from thirup5med (10.42.20.13) to 10.20.250.16 port 33439

ICMP Port Unreachable from gateway 10.42.20.154

for udp from thirup5med (10.42.20.13) to 10.20.250.16 port 33440

64 bytes from 10.20.250.16: icmp_seq=42. time=10036. ms

64 bytes from 10.20.250.16: icmp_seq=43. time=9037. ms

64 bytes from 10.20.250.16: icmp_seq=44. time=8039. ms

64 bytes from 10.20.250.16: icmp_seq=45. time=7040. ms

64 bytes from 10.20.250.16: icmp_seq=46. time=6041. ms

ICMP Port Unreachable from gateway 10.40.20.154

for udp from thirup5med (10.40.20.13) to 10.20.250.16 port 33442

64 bytes from 10.20.250.16: icmp_seq=47. time=5043. ms

64 bytes from 10.20.250.16: icmp_seq=48. time=4044. ms

64 bytes from 10.20.250.16: icmp_seq=49. time=3045. ms

64 bytes from 10.20.250.16: icmp_seq=53. time=0. ms

64 bytes from 10.20.250.16: icmp_seq=54. time=0. ms

64 bytes from 10.20.250.16: icmp_seq=55. time=1. ms

64 bytes from 10.20.250.16: icmp_seq=56. time=0. ms

64 bytes from 10.20.250.16: icmp_seq=57. time=1. ms

64 bytes from 10.20.250.16: icmp_seq=58. time=0. ms

^C

----10.20.250.16 PING Statistics----

59 packets transmitted, 22 packets received, 62% packet loss

round-trip (ms)  min/avg/max = 0/14200/40152

testserver #

Regards,

Senthil

1 REPLY
New Member

Re: ICMP Port Unreachable from gateway 10.40.25.154 for udp from

I answered your duplicate question:

https://supportforums.cisco.com/message/3050721

433
Views
0
Helpful
1
Replies