09-21-2009 06:21 AM - edited 03-06-2019 07:48 AM
Hi,
We are trying to identify the supervisor engine provided by the vendor. I don't have physical access on the switch. They are claiming that they gave us sup720-3bxl but the show inventory and show module displays sup720-3b only.
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SAD044501D5
3 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAL09222DJ4
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1027U4Q5
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
2 0002.fc20.f7ac to 0002.fc20.f7b3 1.3 5.4(2) 8.3(0.156)RO Ok
3 0014.1cd8.a9c0 to 0014.1cd8.a9cf 2.6 6.3(1) 8.3(0.156)RO Ok
5 0014.a982.339c to 0014.a982.339f 5.2 8.5(3) 12.2(18)SXD7 Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD111404WC 1.8 Ok
5 MSFC3 Daughterboard WS-SUP720 SAL1027U7KF 2.5 Ok
------------------ show inventory ------------------
NAME: "WS-C6506", DESCR: "Cisco Systems Catalyst 6500 6-slot Chassis System"
PID: WS-C6506 , VID: , SN: TBA04171663
NAME: "WS-C6000-VTT 1", DESCR: "VTT FRU 1"
PID: WS-C6000-VTT , VID: , SN: SMT04175688
NAME: "WS-C6000-VTT 2", DESCR: "VTT FRU 2"
PID: WS-C6000-VTT , VID: , SN: SMT04171608
NAME: "WS-C6000-VTT 3", DESCR: "VTT FRU 3"
PID: WS-C6000-VTT , VID: , SN: SMT04171143
NAME: "WS-C6000-CL 1", DESCR: "C6K Clock FRU 1"
PID: WS-C6000-CL , VID: , SN: SMT03473817
NAME: "WS-C6000-CL 2", DESCR: "C6K Clock FRU 2"
PID: WS-C6000-CL , VID: , SN: SMT03473687
NAME: "2", DESCR: "WS-X6408A-GBIC 8 port 1000mb GBIC Enhanced QoS Rev. 1.3"
PID: WS-X6408A-GBIC , VID: , SN: SAD044501D5
NAME: "Gi2/1", DESCR: "1000BaseLH"
PID: JGBR12LY02332 , VID: , SN: JUT08520CD9
NAME: "Gi2/2", DESCR: "1000BaseLH"
PID: JGBR12LY02332 , VID: , SN: JUT08520CDE
NAME: "3", DESCR: "WS-X6516-GE-TX SFM-capable 16 port 10/100/1000mb RJ45 Rev. 2.6"
PID: WS-X6516-GE-TX , VID: , SN: SAL09222DJ4
NAME: "5", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.2"
PID: WS-SUP720-3B , VID: V02, SN: SAL1027U4Q5
NAME: "msfc sub-module of 5", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.5"
PID: WS-SUP720 , VID: , SN: SAL1027U7KF
NAME: "Gi5/1", DESCR: "1000BaseLH"
PID: FTLF1318P2BCL-CS , VID: , SN: FNS11171EKP
NAME: "Gi5/2", DESCR: "1000BaseLH"
PID: FTRJ1319P1BTL-C7 , VID: , SN: FNS1022JQ6E
NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3BXL Policy Feature Card 3 Rev. 1.8"
PID: WS-F6K-PFC3BXL , VID: , SN: SAD111404WC
NAME: "PS 1 WS-CAC-2500W", DESCR: "110/220v AC power supply, 2500 watt 1"
PID: WS-CAC-2500W , VID: , SN: ART0639007U
NAME: "PS 2 WS-CAC-2500W", DESCR: "110/220v AC power supply, 2500 watt 2"
PID: WS-CAC-2500W , VID: V01, SN: ART0913E0GM
Is it a sup720-3b or sup720-3bxl?
Thanks in advance
John
09-21-2009 06:41 AM
Hi john,
It is a PFC3b-xl you can see in sh inventory there is :
NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3BXL Policy Feature Card 3 Rev. 1.8"
PID: WS-F6K-PFC3BXL , VID: , SN: SAD111404WC
You can as well verify runtime operation of the pfc using :
sh platform hardw pfc mode
Roland
09-21-2009 07:16 AM
So it can be considered as sup720-3bxl?
09-21-2009 07:47 AM
NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3BXL Policy Feature Card 3 Rev. 1.8"
PID: WS-F6K-PFC3BXL , VID: , SN: SAD111404WC
hi, WS-F6K-PFC3BXL i saw it in your output.
hope it help
Yang
09-21-2009 11:30 AM
So only the PFC is the difference. If I have a Sup720 hardware and I installed PFC3BXL then it can be considered as Sup720-3bxl?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide