Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Identify 6509e chassis

New work site, and I have a 6509 with sup2-msfc2 running native IOS. Is there a way to tell if this is a 6509-E chassis and use a sup720? It also has the ws-c6k-6slot-fan2=(are these the high speed fans) and two 1350 watt powers supplies.

7 REPLIES
Hall of Fame Super Blue

Re: Identify 6509e chassis

Run a "sh ver".

Ii will say

cisco WS-C6509-E

if it is the Enhanced chassis otherwise it will just say

cisco WS-6509

You can use a Sup720 on both the Enhanced and non E chassis.

With the Enhanced chassis the fan part number is WS-C6509-E-FAN

With the non E chassis it is the one you have.

You will need 2500W power supplies minimum to run the Sup720.

HTH

Re: Identify 6509e chassis

Try " show idprom backplane "

C6509E#show idprom backplane

IDPROM for backplane #0

(FRU is 'Catalyst 6500 9-slot backplane')

OEM String = 'Cisco Systems'

Product Number = 'WS-C6509-E' <---- This is the E chassis.

Serial Number = 'SMG0820N0UK'

Manufacturing Assembly Number = '73-9221-03'

Manufacturing Assembly Revision = 'A0'

Hardware Revision = 1.1

Current supplied (+) or consumed (-) = -

HTH,Please rate if it does.

-amit singh

Hall of Fame Super Blue

Re: Identify 6509e chassis

Apologies -

the non E chassis in a "sh ver" output will be WS-C6509 not WS-6509 ( typo ).

Community Member

Re: Identify 6509e chassis

Thanks for the info.

Community Member

Re: Identify 6509e chassis

Bd,

In addition to identify the sup,this will get you starts:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/supe_gd/02superv.htm

HTH,

lP

Re: Identify 6509e chassis

Try " show idprom backplane "

C6509E#show idprom backplane

IDPROM for backplane #0

(FRU is 'Catalyst 6500 9-slot backplane')

OEM String = 'Cisco Systems'

Product Number = 'WS-C6509-E' <---- This is the E chassis.

Serial Number = 'SMG0820N0UK'

Manufacturing Assembly Number = '73-9221-03'

Manufacturing Assembly Revision = 'A0'

Hardware Revision = 1.1

Current supplied (+) or consumed (-) = -

HTH,Please rate if it does.

-amit singh

Community Member

Re: Identify 6509e chassis

Thank you Amit. It looks like I have all non-E chassis's. B~

2458
Views
5
Helpful
7
Replies
CreatePlease to create content