Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

identify POE module in cisco 4506 swith

Hi,

How to identify the switch module supports POE.Does (RJ45)mean it supports POE.

3 REPLIES

Re: identify POE module in cisco 4506 swith

Usually you will see a "V" or "AF" in the module name.

HTH,

Mark

Hall of Fame Super Silver

Re: identify POE module in cisco 4506 swith

Hello Solomon,

that is not enough see

switch1>sh module

Chassis Type : WS-C4506

Power consumed by backplane : 0 Watts

Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+ JAE09159QEF

2 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE0916AD7F

3 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE0916AD6R

the V means that are voice capable and POE capable

Hope to help

Giuseppe

Community Member

Re: identify POE module in cisco 4506 swith

RJ45 specifies the type of port you have. For a module to support POE, it should display the letter "V" at the end of the line card model when you do a "show mod".

604
Views
0
Helpful
3
Replies
CreatePlease to create content