IE-2000-4TS-B or IE-2000-4TS-L1 support PVST+ or Rapid PVST+ ?
Hello. I need to know IE-2000-4TS-B or IE-2000-4TS-L1 support PVST+ or Rapid PVST+ ? This very important to me. In datasheet I can't find this information. I was try ask this in our - Russian CISCO support on last week but they are still don't answer me. I want know this as quickly as possible,else industrial network will be designed on MOXA switches with MSTP support (less preferably).
Based on the switch configuration guide for 15.0(1)EY, both PVST+ and Rapid PVST+ are supported on the IE 2000:
The switch can use either the per-VLAN spanning-tree plus (PVST+) protocol based on the IEEE 802.1D standard and Cisco proprietary extensions, or the rapid per-VLAN spanning-tree plus (rapid-PVST+) protocol based on the IEEE 802.1w standard.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.