Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IE-3000-4TC with IEM-3000-4PC

Hello

We've used ie-3000 series for the first time, and tried to make system consisting of

IE-3000-4TC+ 2x IEM-3000-4PC work, assigned ip to IE-3000-4TC, entered its interface from web and cisco enwork assistand but weren't able to make

IEM-3000-4PC work. And weren't abel to find a configuration page to activate conenction between this components.

IEM-3000-4PC untis are powered by PWR-IE65W-PC-AC that's led indicated DC pwoer is ok, but all leds on

IEM-3000-4PC are off, we tried t oconnect to network throgh it's port by laptopn, the led was orange all the time and network was not accessible

  • LAN Switching and Routing
2 REPLIES
Cisco Employee

IE-3000-4TC with IEM-3000-4PC

Hi Mikheil,

If you are trying to get the IEM-3000-4PC to work, make sure that you are on at least 15.0(2)EY1.  This is probably the most common "gotcha" I come across.  Hope that helps.

-Lp

New Member

IE-3000-4TC with IEM-3000-4PC

hi Richard

Thansk for reply, you're absolutely corret. The switch has 12.x IOS and we're waiting for demanded one from our supplier

445
Views
0
Helpful
2
Replies