Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IE3000 removable compact flash duplication

Hi

I have purchased a spare removable CF for the industrial Ie3000. I would like to duplicate the original so I can recover failures quickly. I tried inserting the new flash and copying running to startup but this failed. Is there a procedure for this?

regards

Noel

1 REPLY
New Member

Re: IE3000 removable compact flash duplication

I have worked out what is wrong. The Compact flash is glued to a clear plastic carrier which is used to quide the CF into the slot. On all the spare CF modules I purchased are glued to the carrier upside down. This stops the CF from connecting correctly. I have removed the CF from the carrier and re-glued the right way up and the copy works fine.

Must be a manufacture problem

120
Views
0
Helpful
1
Replies