Re: If Lan cable to switch from pc to switch is losely plugge di
It is very difficult to tell.
In some specific circumstances when you have a so called intermittent connection, it may happen that for some time the plug pins are connected, then a truck travels along the building causing some trembling and the connection may get lost.
If your cable is loosely connected, then you should plug it in a tightened way so the above cannot happen.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...