Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

implement qos on a cisco 3560 switch

Please help!!!

I have a 3560-48 switch running Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(44)SE3 and i need to implement basic QOS commands to the fast Ethernet interfaces as well as the gig  interfaces and Also I need to create port channels on the switch and need what the port channel syntax are as well for that particular IOS version? 

I have only read only access and i can't see what the QOS and Port channels syntax should be for that IOS version.

Any help would be greatly appreciated.

Thanks in advance.

Jack

3 REPLIES
Cisco Employee

implement qos on a cisco 3560 switch

Hi Jack,

Following is the configuration guide for 3560 QoS there you can aloso find other information you need about commands.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swqos.html

You will need admin level to configure the switch.

*Please rate helpful answers.

Best regards,

Alex

New Member

Re: implement qos on a cisco 3560 switch

Thanks for the quick response.

-- Sent from my Palm Pre on Verizon Wireless

Cisco Employee

implement qos on a cisco 3560 switch

I am happy to help you.

Please rate helpful posts.

Best regards,

Alex

337
Views
0
Helpful
3
Replies