I have a flat network and every thing is in vlan 1, the network is subnet already, no trunking to core switch. The company will replace there core switch with 5 3750E stack switches. I was wondering do the other switches in the stack need to be configured beside the master switch and do the fiber port on each stack switch need to be trunk.
First connect up your core stack switches physically and power it all on. Check to see which one is master (sh ver). Console into master and configure. Fiber port need to be trunk only if you plan to have multiple vlan's travelling through those ports. If you only use vlan1 then no need.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.