05-08-2007 04:28 AM - edited 03-05-2019 03:55 PM
Hi,
We have recently set up a 6509, experiencing errors on both of the
WS-X6748-GE-TX modules. Its on the trunk interfaces to 2 cisco WS-C3550-24.
When we moved the trunk to the sup port
we got no errors.
We are planning to connect a pc to the ports to see if the problem persist.
Any ideas ?
#sh int GigabitEthernet1/3
GigabitEthernet1/3 is down, line protocol is down (notconnect)
Hardware is C6k 1000Mb 802.3, address is 001a.a249.8aaa (bia 001a.a249.8aaa)
MTU 1546 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA, loopback not set
Auto-duplex, Auto-speed
input flow-control is off, output flow-control is desired
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input 1d03h, output 1d03h, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/100455/0 (size/max/drops/flushes); Total output drops: 1
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
43209443 packets input, 51556057716 bytes, 0 no buffer
Received 9745 broadcasts (9148 multicast)
0 runts, 0 giants, 0 throttles
100455 input errors, 0 CRC, 0 frame, 64 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
43208415 packets output, 51699821574 bytes, 0 underruns
1 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Regards,
Bjornarsb
05-14-2007 05:56 AM
If you ever see hits on the "Input queue" in 'sh int',it means you are process switching traffic which is ,really bad. show cdp traffic CDP counters will be helpful command.
For more information please click following URL:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide