Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

int vlan

Hello

do we need this Config inder the interface vlan 165?

interface Vlan165

description "x-y-z"

ip address x.x.x.x 255.255.255.0

no ip redirects

mls rp vtp-domain Test

mls rp ip

2 REPLIES

Re: int vlan

The no ip redirects command is used as a secuirty config.

The other commands are used when you do MLS (old switches like the 5500 with RSM or external router. Here we send the first packet to the Layer 3 engine and marks the packet as candidate. when the L3 engine returns the packet and the conditions match, the switch creates a flow and subsequent packets are multilayer switched

http://www.cisco.com/en/US/docs/switches/lan/catalyst5000/hybrid/mls.html

HTH

Narayan

New Member

Re: int vlan

10xs Narayan

298
Views
5
Helpful
2
Replies