Intel Pro 100 & Cisco Catalyst 2960G

[Informatica SSRP]

Hello, I have this issue:

Switch Cisco Catalyst 2960G + utp cat 6 cable + nic Intel Pro 100 VM (With WIN XP latest drivers)

I can't get it work.

Autosensing in both points = cable disconected

100 full in both points = connection ok, but no pings

100 half in both pints = connection ok, but no pings

10 full or half in both points = lose many pings (50% of them)

This problem happens only with this type of nic (tested three different ones). If I change the nic (intel pro 1000, 3com, or realteck, or Broadcom) the connection is ok at any speed (10 / 100 / 1000).

Is there any know bug or problem related with this nic?

NOTE: unchecking "allow the computer turn off this device" doesn't work.

Thanks

[Nagaraja Thanthry]

Hello,

Issue seems to be with the Intel drivers.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note0918

6a00800a7af0.shtml#nic_comp

I would suggest you contacting Intel and see if they have a fix for the

drivers.

Regards,

NT