I'm using PT 532 to test inter vlan routing, the testing diagram included LAN, DMZ and WAN.
ip routing enabled on Cisco 3560 L3 switch, so PCs on different Vlan can ping each other. I want apply ACL on Vlan 5 (test) interface that can access to Vlan1 (this Vlan has DHCP server that assign IP to all Vlan), DMZ and WAN, but can't access to other Vlan, and DMZ and WAN cannot access to Vlan 5.
The problem you have with you trunk ports configuration.
On the switch you should have only Fa0/1 which conects to router and Fa0/4 which connects to DHCP server as access ports assigned to their respective vlans, the rest should be trunk ports assigned to the native vlan.
If you do that you should be able to follow Reza's advice to configure and apply the ACLs.
You have all the ACLs you need on the switch just choose the right one and apply it to right interface and should work.
Please mark the questions as answered, that way people know that it has been answered and can help other people with unanswered questions.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.