I had a quick look at your config and it looks fine but I believe there is a bug in Packet Tracer in regards to HSRP. Your clients are able to ping the physical HSRP addresses but not the Virtual Address which seems to be the bug people are hitting which makes HSRP a little pointless to have. Packet tracer is a learning tool but this is a fairly fundamental bug which should be been found out with better QA.
But your problem with version of Packet Tracer, I'm Tested your file attached (HSRP + ETHERCHANNEL.pkt.zip) with latest Ver. from Packet Tracer (( 6.1 )) and I have found that it works correctly without any problems.
If u need to download the latest ver. you can access to the followings link:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...