This show buffers command output indicates a buffer leak in the middle buffers pool. Use the show controllers ethernet-controller privileged EXEC command without keywords to display per-interface send and receive statistics read from the hardware. Use with the phy keyword to display the interface internal registers or the port-asic keyword to display information about the port application-specific integrated circuit (ASIC).
Switch# show controllers ethernet-controller port-asic statistics
Thanks for the reply. My next question is, I am running the debug sanity. Then when I run the show buffers old I dont see anything in there. So this leads me to believe I am not having an issue with a buffer however it looks like I am missing something. Is there anymore information to debug this issue? I am running the latest IOS for the 3750 E series, 12.2(44)SE5.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.