07-05-2007 04:19 AM - edited 03-05-2019 05:08 PM
We have used the interface range command to configure all ports on module 1 6724 on a 6509. Now when I try to configure a port individually it still propogates configuration to other ports on the module.
Any ideas why?
6509(config)#int gig 1/13
6509(config-if)#wrr-queue cos-map 1 2 3 4
NW-MSQ1-F02-CS1(config)#int gig 1/13
NW-MSQ1-F02-CS1(config-if)# wrr-queue cos-map 1 2 3 4
Propagating cos-map configuration to: Gi1/13 Gi1/14 Gi1/15 Gi1/16 Gi1/17 Gi1/18
Gi1/19 Gi1/20 Gi1/21 Gi1/22 Gi1/23 Gi1/24
IOS version: s72033-Adventservicesk9_wan-mz.122-18.SXF6.bin
1 24 CEF720 24 port 1000mb
Solved! Go to Solution.
07-05-2007 05:07 AM
WS-X6724-SFP 24 ports, 2 port groups: ports 1-12 and 13-24. PFC QoS applies identical configuration to all LAN ports controlled by the same application-specific integrated circuit (ASIC).
For more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/qos.htm
07-05-2007 05:07 AM
WS-X6724-SFP 24 ports, 2 port groups: ports 1-12 and 13-24. PFC QoS applies identical configuration to all LAN ports controlled by the same application-specific integrated circuit (ASIC).
For more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/qos.htm
07-05-2007 05:11 AM
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide