Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Interface Vi1 bound to profile Di - Cisco Router 2800

Hi  Freinds ,

I have big problem just happned today

ADSl on router 2800 change status up and dwon evry thime

Error message :

*Dec  7 13:11:06.999: %DIALER-6-BIND: Interface Vi1 bound to profile Di0

*Dec  7 13:11:07.003: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up

*Dec  7 13:11:06.999: %DIALER-6-BIND: Interface Vi1 bound to profile Di0
*Dec  7 13:11:07.003: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down

This my Config

interface ATM0/3/0.1 point-to-point

pvc 8/35

pppoe-client dial-pool-number0

nterface Dialer0

ip address negotiated

ip mtu 1452

ip nbar protocol-discovery

ip nat outside

ip virtual-reassembly

encapsulation ppp

dialer pool 1

dialer-group 1

no cdp enable

ppp authentication pap chap callin

ppp chap hostname xxxxxxxx

ppp chap password 0 xxxx

ppp pap sent-username xxxxx password 0 xxxxx

ppp ipcp dns request

Thanks

484
Views
0
Helpful
0
Replies