Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

interface vlans

hi,

i am running

     WS-C2960G-48TC-L   12.2(25)SEE3            C2960-LANBASE-M

I know I can do interface vlans but will I be able to do basic routing to another network using the interface vlans

The end goal is to have a switch uplink to another switch that has servers off it that need to talk to a storage device.

Thank you.

Lynne

Everyone's tags (3)
3 REPLIES
Hall of Fame Super Silver

interface vlans

Lynne

It is my understanding that in release 12.2(55)SE they added the ability to do static routing, which might be sufficient for your requirements - if I have read correctly what your requirements are. However the code in your switches is older and therefore I do not believe that you could do the routing in this switch - at least not without a code upgrade.

HTH

Rick

Re: interface vlans

Hello

Like to jsut add to Ricks comments  -Although it doesnt support routing protocols, it does indeed allow static and default routes when sdm prefer lanbase-routing is enabled using 12.2(55)SE and above

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swipstatrout.html

res

Paul

Please don't forget to rate any posts that have been helpful.

Thanks.

Please don't forget to rate any posts that have been helpful. Thanks.

interface vlans

Hi,

Check the below posting. You may need IOS upgrade.

https://supportforums.cisco.com/thread/2196481

hth

MS

174
Views
0
Helpful
3
Replies