Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

intermitten duplex mismatch on Cisco router 2800

At our remote location, every once in a while, the metro connection from there to our building, will come up with a duplex mistmatch error.

Both interfaces are set to full duplex..however the only way to fix it, is if i reboot the router at the other location..then its good for a while, but again, every once in a while comes back with a duplex mismatch.

Any ideas?

2 REPLIES

Re: intermitten duplex mismatch on Cisco router 2800

Bad cable maybe. If you have both hard coded, it shouldn't be negotiating at all. I would check the cable.

--John

HTH, John *** Please rate all useful posts ***
Community Member

Re: intermitten duplex mismatch on Cisco router 2800

Thanks John!

I asked another senior engineer the same question and he gave me the exact same answer..

I just didnt want to get too technical when i know it is going to be something simple..

I will run new cable becuase the cable at the other building is kinda old anyway...

342
Views
0
Helpful
2
Replies
CreatePlease to create content