Please make sure you can ping/telnet to your proxy server (if you are using any). Telnet to proxy IP on port 80 or 8080 whatever is being used. Moreover, if there is no proxy server in place, you might need to look into the NAT table of your firewall to make sure it has not exceeded the limits (very unlikely though).
By the way, does the edge firewall shows any particular log while you see the internet down?
It is happening only with natted ips not for the proxy through accessing Users.
Users are accessing via natting is DNS is configured in router where you have configured natting,if yes what is the dns server ip because at the time of problem you need to check that dns server is up and reachble or not.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...