Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Interoperability C2960 VS Siemens X switch

I've a C2960 interconnected with a Siemens X208. I want to fixe the mode in 100Full on the both side,but when I do that, port state remains down and no errors appears on the cisco.

C2960 Siemens Results

100full Auto Siemens 100Half

Auto Auto 100Full /2side

Auto 100Full Down

100Full 100Full Down

Config Cisco

interface FastEthernet0/4

description /// PORT VLAN 11 - VDL 2 ///

switchport access vlan 11

switchport mode access

spanning-tree portfast

I think the problem is on the X208 but if somebody have an idea ...

1 REPLY
Purple

Re: Interoperability C2960 VS Siemens X switch

Make sure you are using a crossover cable between them.

143
Views
0
Helpful
1
Replies