Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Invalid image for platform of a WS-C4507R Cisco

Hello,

A customer wants to upgrade an IOS Base (cat4500-ipbasek9-mz.122-25.SG4.bin) of a WS-C4507R Cisco, for a  IOS that have a enterprices functionalities.We install an IOS cat4500e-entservicesk9-mz.122-53.SG5.bin, but we had the following results:

config-register = 0x2102

Autobooting specified file using Variable BOOT .....

Current BOOT file is --- bootflash: cat4500e-entservicesk9-mz.122-53.SG5.bin

  loadprog: error - Invalid image for platform

type = image CPU 183, CPU platform type = 112

  boot: can not load "bootflash: cat4500e-entservicesk9-mz.122-53.SG5.bin"

The switch will now reboot Automatically ...

because that happened? ... The ios installed is not recommended?

Thanks for answers

1 REPLY
Cisco Employee

Invalid image for platform of a WS-C4507R Cisco

You need to match the SUP version on the image. If you take a look closely, your original image is non-E image:

Original:

cat4500-ipbasek9-mz.122-25.SG4.bin

New:

cat4500e-entservicesk9-mz.122-53.SG5.bin

             ^

HTH,

jerry

746
Views
0
Helpful
1
Replies
CreatePlease to create content