11-17-2006 03:36 AM - edited 03-05-2019 12:52 PM
Hi
Can anyone suggest how to fix valid magic number on 3825.
see the below message
loadprog: error - trouble reading file magic number
boot: cannot load "flash:"
Thanks
Mahmood
11-17-2006 03:44 AM
did you do anything with flash banks? maybe you put it out and then put in or smth like that?
11-17-2006 03:49 AM
Hi
thanks for u r reply.actually the problem is that the ios got corrupted and i upload the new ios using tftpdnld.after that when i reboot it i got this message.any comments.
Thanks
Mahmood
11-17-2006 03:50 AM
try uploading the flash file again and at the end of the upload do a verfication using the command verify flash:
If this fails too try formatting the flash memory and upload the IOS
HTH, rate if it does
Narayan
11-17-2006 03:55 AM
Hi
thanks for your reply.can u suggest me hoe to format the flash.
Thanks
Mahmood
11-17-2006 11:31 PM
Hi guys
Any update...
Thanks
Mahmood
11-17-2006 11:48 PM
Hi,
Go through this link
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3700/sw_conf/37_swcf/appendb.htm
HTH, rate if it does
Narayan
11-18-2006 12:17 AM
Hi
Thanks for your reply.but the problem is that i am in rommon so i cannot use this command.any help..
Thanks
Mahmood
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: